中国安全科学学报 ›› 2020, Vol. 30 ›› Issue (10): 186-190.doi: 10.16265/j.cnki.issn 1003-3033.2020.10.026

• 职业卫生 • 上一篇    下一篇

护目镜快速检测仪的研制

商景林 高级工程师   

  1. 上海市安全生产科学研究所 劳动防护用品检测站,上海 200233
  • 收稿日期:2020-07-21 修回日期:2020-09-02 出版日期:2020-10-28 发布日期:2021-07-15
  • 作者简介:商景林 (1979—),男,河南商城人,博士,高级工程师,主要从事个体防护装备产品的检测检验、设备的研发以及相关国内、国际标准化工作。E-mail:jlshang@mail.sitp.ac.cn。
  • 基金资助:
    国家标准化管理委员会标准制修订项目(20183369-Q-450,20202710-T-450)。

Development of a fast testing device for eye guards

SHANG Jinglin   

  1. Personal Protective Equipment Testing House, Shanghai Institute of Work Safety Science, Shanghai 200233, China
  • Received:2020-07-21 Revised:2020-09-02 Online:2020-10-28 Published:2021-07-15

摘要: 为了加强护目镜的质量控制和缩短护目镜的检测周期,进而保障人眼安全和促进相关产品的出口,在分析国内外护目镜标准中可见光透射比技术要求和测试方法的基础上,依据最新护目镜国际标准中规定的宽光谱光源测量方法,结合产品检测过程中的实际需求,研制一台护目镜快速检测仪;利用标准镜片对该检测仪进行校准。研究结果表明:不同国家标准对护目镜可见光透射比的技术要求和测量方法均有差异;校准结果符合国际标准中对检测设备精度的要求;所研制的检测仪的可见光透射比测量精度高、速度快,可作为标准检测设备广泛应用于生产企业、检测机构和终端用户。

关键词: 护目镜, 快速检测仪, 可见光透射比, 宽光谱光源, 国际标准

Abstract: In order to improve quality control of eye guards and reduce testing period so as to guarantee safety of human eyes and promote export of products, luminous transmittance requirements and testing methods in domestic and foreign standards were analyzed. Then, based on broadband light source measurement method stipulated in the latest published international standard, a fast testing device was developed according to actual demand. Finally, it was calibrated by standard oculars. The results show that luminous transmittance requirements and testing methods vary significantly in standards of different countries. The newly developed testing device is accurate and fast, so it can be widely used as a standard testing instrument to measure luminous transmittance for eye guards.

Key words: eye guard, fast testing device, luminous transmittance, broadband light source, international standard

中图分类号: